These prevent distance loss and directional unstability even with off-center-hit！The result that off-center-hit-ball comes back to the center.
GROOVE is placed on the closest position of sole part to the face that expanses repulsion area.
Expansion of repulsion area Further idmproves “Distance loss” and “unstable direction”！
※Especially in the case of mishit on the heel side, it saves spin rate and the ball does not rise that increases distance.
HONMA’s specialty for head shape
Not only big, expression of sharpness and strength in size.
Easy-to-hit of a look when address provides confidence and the shape to be able to swing smoothly increases distance and high trajectory.
Focus on the grasp of the head
The design that focuses on the grasp with expansion of center of gravity angle. There is no need to adjust to the excessive hook face.
Large center of gravity angle → Easy to catch the ball
Our power of development that satisfies professionals is put into achieving amateur golfers' full potential.
Evolution1: Head speed increase！5㎜ lower kick-point & 9㎜ higher kick-point(compared to the previous model)
Evolution2: Easy to take timing for wide range of golfers！The design is for wide range of targets and the rigidity in the shaft high-point increases. Higher launch angle.
Evolution3: Reduction of power loss！Adoption of TORAYCA® prepregs prevents power loss of when mishit at minimum.
Design technology to "Effectively" convey power to the ball
EPT-Tech（Efficient Power Transmission Technology）CAE of TORAY(Computer Aided Engineering) analysis technology was used to co-develop low/high-kick-point with TORAY Inc., the world's largest carbon fiber supplier. The best material including “a vibration damping material” was selected from 100 carbon fiber TORAYCA® prepreg with plenty of design simulation on data. Moreover, as the result of HONMA’s tests and careful consideration, this shaft was developed that effectively brings out the potential of a wide range of amateur golfers.
|HEAD MATERIAL / MANUFACTURING PROCESS||SUS630 / CASTING|
|FACE MATERIAL / MANUFACTURING PROCESS||HIGH-STRENGTH CUSTOM STEEL / ROLLED|
|SHAFT||VIZARD for Be ZEAL|
|LIE ANGLE (DEG.)||60.0||60.5||61.0|
|HEAD VOLUME (CM3)||175||159||146|
GROSS WEIGHT (G)
|VIZARD for Be ZEAL||L||B9・280||B9・284||B9・288|
|MATERIAL||CARBON + VIBRATION DAMPING MATERIAL|
|BUTT DIAMETER (MM)||L||15.3||15.3||15.3|
|TIP DIAMETER (MM)||8.6||8.6||8.6|
|GROSS WEIGHT (G)||L||43||42.5||42.0|