This driver pluses great distance performance, forgiveness, and draw-biased function to existing TW757 drivers for golfers who want to easily get long carry with a tour model.
The thickness of the sole slit is thinned to maximize the repulsion performance, and it is reinforced with carbon to maintain the strength. As a result, it succeeds in maximizing repulsion performance.
By placing a 9g tungsten weight backward on the outside of sole, it achieves low CG design with deep CG simultaneously.
By removing the weight at the toe side on Type-D and moving the position of its keel design as well as back weight closer to the heel, the CG angle is increased for more draw bias performance.
The repulsion area is expanded to the edges of the face by the radial face structure. Due to the structure, it remains the high initial ball speed even on miss hits at any point.
Both the optimal rebounding and rigidity are achieved, by reducing the crown weight and adopting the ribs to increase the rigidity around the face. This uneven thickness structure enhances the repulsion performance on the whole head, and it realizes higher initial speed, higher trajectory, as well as optimized spins.
The spine is set identically on all clubs, to stabilize shaft movement and retain consistency through the set.
The HONMA original system enables to adjust lie, loft, and face angle without rotating or detaching the shaft by using the included torque wrench. The angle adjustment system provides consistent shaft performance in combination with P-SAT, even when changing the angles.
The rigidity of the butt and tip side is increased, by suppressing the rigidity of the center part. It generates a optimal bending and steadiness, and that enables to take a timing easier and brings comfortable feeling for swing. The shaft also achieves the high launch and the trajectory with low spins.
Golfers feel the weight at the tip, by layering the Ni-Ti alloy with shape retention properties on the tip. It provides a good reaction at the start of the downswing, and helps golfers achieve efficient ball.
Golfers feel whip from the mid-to-butt area. This shaft’s draw bias is achieved by layering TORAYCA® T1100G, the ultra-high strength and elastic material, on each part.
The rigid tip area reduces extra whip by layering the high-strength and elastic carbon fiber material TORAYCA® M40X on the tip area. It achieves mid and strong trajectory, without ballooning ball flight.
This shaft contains ultra-high elastic carbon TORAYCA®M40X on the bias layer for tip reinforcement, and the ultra-high strength and elastic TORAYCA®T1100G on all layers.
High-spec materials are designed for specific areas of the shaft, to help increase swing speed.
This shaft increases swing speed and accuracy, via upgraded torque performance with decreased frequency.
Player